no edit summary
#1 - General Overview ==
* Overview of the GUI
#2 - Using the 6 Track Recorder and various Units ==
* Using the 6 Track Record to record audio
#3 - Creating a Synth Voice with Audio File as an Oscillator ==
This video skips the step of recording/loading some files into the Sample pool (checkout video 2)
#4 - Sampler / Looper Overview ==
External Gear used: Sputnik keyboard w/ arpegiator. Pamelas Workout for arp clock and looper reset, Mic source
#5 - Creating an Audio Freezer from Scratch ==
The goal here is to use the Sample Record (Looper) as a "poor man's Audio Freezer" and demonstrate how a traditional audio effect can be used to manipulate CV signal.
#6 - Building an FM Synth ==
The goal here is to build a basic FM voice (1 modulator/1 Carrier) with external 1/v octave tracking using available units.
#7 - Parallel Audio Processing Hints ==
The goal here is to use multiple blocks to process signals in Parallel.
#8 - Custom Units Overview ==
A glimpse of some updates:
#9 - Running a Drum ROMpler, Send/Return FX, Custom Units ==
* Running OS v0.1.6pre11
* creating a master mixer, with independent sources such as a synth and drum rompler running in separate processing tracks/blocks
#10 - Using an internal Master CV Source ==
* Running OS v0.1.6pre11
* This is a super fast one!
#11 - The Poor Man's Vocoder ==
* Running OS v0.1.6pre11)
* Can a Vocoder be built out of units even if we don't have bandpass filters? (barely but it sounds interesting)
*NOTE: As of maybe an hour after I made this video, Brian has released a patch upping the timings to 10 seconds for attack, decay and release. !!! :D So this vid is irrelevant for increasing ADSR envelope timing. However, keep in mind you can have some more interesting CV shapes and wiggles recorded... and adjusting the player speed will affect the rate of this CV data!**
the Stress unit to bring the audio engine to the brink of destruction. This probably isn't all that practical.. but it sounds cool!
HpdCfEvL9vE ## **Getting Started with the ER-301 #15 - Using a Sampler Player and Looper with a SHARED buffer file** Running OS v0.1.6pre13) *Using a Sampler Player and Sample Looper with a shared buffer file. https://youtu.be/hVUvZX5KCeE ## **Getting Started with the ER-301 #16 - An example of a Big Complex Patch ** Running OS v0.1.6pre13) Using all sorts of goodies Simultaneously: * Loopers * Recorders * Synth Bass * Synth Arp * Keyed Gain Reduction * Send/ Return to 3rd part Eurorack FX https://youtu.be/2E44TuQ8TxU ## **Getting Started with the ER-301 #17 - Polysynth and Multi-tracking using Loopers** Running OS v0.1.6pre13)
* Poly Synth
* Sneaky method of using the Looper!
* Patching signals from multiple channels
## **Getting Started with the ER-301 #18 - Making and Saving a Utility Unit** Running OS v0.1.6pre13)
This is a super quick one. How to make a basic "utility" unit and have it show up in the Unit list.
* How to dynamically adjust the looper length on the fly in a musical way with nothing more than a gate signal!
* Apologies for the shakes - i had my KB37 on my living room table and my tripod was on the table
##**Getting Started with the ER-301 #20! GRAINS!! Woo!!**