Changes

Jump to: navigation, search

ER-301/Neil's Getting Started Videos

253 bytes removed, 5 years ago
no edit summary
* How to dynamically adjust the looper length on the fly in a musical way with nothing more than a gate signal!
* Apologies for the shakes - i had my KB37 on my living room table and my tripod was on the table
<youtube>https://forumyoutu.orthogonaldevices.combe/uploadshtERxfKF-RY</default/optimized/1X/eb77f6383b37985c609e0027cd521e83b8084312_1_401x500youtube>[[File:Setup for dynamic loop lengths.jpg|thumb]]
<youtube>https://www== More Grains + Special Guest! ==* firmware v0.youtube2.com/watch?v=uK8MM9LuCWI</youtube>0
##**Getting Started with the ER<youtube>https://youtu.be/QTBw5wk-301 #20! GRAINS!! Woo!!**v0.2.0y1U</youtube>
https://youtu.be/htERxfKF-RY ##**Getting Started with the ER-301 #21: == More Grains + Special Guest! :smile_cat:**v0.2.0 https://youtu.be/QTBw5wk-y1U==##**Getting Started with the ER-301 #22: More Grains**firmware v0.2.2
* Using only the ER-301 with a recorded audio file
* Units Used: Manual Grains, SIN, Triangle, S&H, Pink Noise, Limiter, Pitched Delay
<youtube>https://youtu.be/RjfxqDn-ZTY</youtube>
##**Getting Started with the ER-301 #22 (ACTUALLY #23) : == Grains and Loopers==**firmware v0.2.2
* Using the Grains with 2 x Loopers.
* The First Looper is to 'Grab' your incoming Audio for a specific period of time
* The Grains the accesses this same audio buffer for manipulation
* The Second Looper is to record (AND Overdub) the results!
-The First Looper is to 'Grab' your incoming Audio for a specific period of time-The Grains the accesses this same audio buffer for manipulation-The Second Looper is to record (AND Overdub) the results! <youtube>https://youtu.be/H5xMPzUiypg</youtube>
##**Getting Started with the ER-301 #24) : == Perfectly sweeping a Manual Grain Unit's File Position==**firmware v0.2.2
* How to perfectly sweep the sample position within a Manual Grains unit.
**NOTE: instead {{note|Instead of using the OFFSET unit, you can set the start bias to .5 to accomplish the same adjustment .}}
<youtube>https://youtu.be/qqXwEEQvx8Q</youtube>
##**Getting Started with the ER-301 #25) : == Creating a Quickly assignable Unity Mixer==**firmware v0.2.4
* Using a Custom Unit
<youtube>https://youtu.be/HttFlQfVmWQ</youtube>

Navigation menu