Changes

Jump to: navigation, search

ER-301/Manual Loops

1 byte removed, 3 years ago
len
{{GainBias|gain (-10 to 10)
bias (-1 to 1)|linear, proportional to max.len parameter}}
 
This parameter sets the length of the loop as a proportion of either the entire sample length, or, the value of the max.len parameter, whichever is smaller. For example, if the sample is 60s long but the max.len parameter is set to 12s, then a value of 0.25 would set the loop length to 3s (= 0.25 x 12s). A negative length causes the loop to play in reverse.

Navigation menu