Changes

Jump to: navigation, search

ER-301/Teletype Connection Rev7

140 bytes added, 3 years ago
Required Hardware Modification
Step 5: And solder like this:<br>
https://forum.orthogonaldevices.com/uploads/default/original/2X/0/0a3722da3150d3243fa63971b0b5cedc7da948cf.png
 
Step 6: Check continuity between the right side of R62 and the RX/SDA pin of the UART connector.
[[File:continuity-with-RX-SDA.png|400px]]
{{Pitfall | Do not use a [https://en.wikipedia.org/wiki/Desoldering#Desoldering_pump solder sucker] on this board. If you need to remove excess solder, please use copper braid.}}

Navigation menu