Changes

Jump to: navigation, search

ER-301/Teletype Connection Rev7

198 bytes added, 3 years ago
Connecting the Teletype to the ER-301
{{Pitfall|Since these connection pins were originally meant for UART communication you will need to perform a simple hardware modification to your ER-301 in order to enable i2c communication. Please refer to the '''I2C Mod''' section below for further instructions.}}
 
'''Please note:''' The ER-301 does not ship with i2c cables. Here is some info on how to DIY your own cables: [https://llllllll.co/t/diy-i2c-cables/12833?u=odevices DIY i2c cables @ LINES forum].
https://forum.orthogonaldevices.com/uploads/default/optimized/2X/6/62dc38713e6ee15dd27eac9679903d5763a9daff_1_690x353.jpg

Navigation menu