Jump to: navigation, search

ER-301/Teletype Connection Rev7

195 bytes removed, 3 years ago
Connecting the Teletype to the ER-301
'''Please note:''' The ER-301 does not ship with i2c cables. Here is some info on how to DIY your own cables: [ DIY i2c cables @ LINES forum].
There are 5 pins extending parallel from underneath the ER-301 CPU board. You will only be using the top 3. You can also see that the 5 pins are labeled on the ER-301 silkscreen as TX, RX, GND, GND, and 5V. Connect like this:
* Teletype SDA to ER-301 RX.
== Required Hardware Modification ==

Navigation menu