Changes

Jump to: navigation, search

ER-301/Slew Limiter

1 byte added, 2 years ago
time
bias (3ms to 1000s)|time in seconds}}
This time value is use to determine how long it takes for the output value to change by 1 (i.e. full-scale starting at zero). So if the time value were set to 100ms, and a 0-to-1 step signal were fed to the input of this unit, then output would be a ramp that reaches 1 exactly 100ms after the step input signal reached 1.
[[File:slewing-a-step.png|400px]]

Navigation menu