Jump to: navigation, search

ER-301/Front Panel

4 bytes removed, 4 years ago
Channel 1-4 Buttons
<br clear=all>
== Channel 1-4 Buttons ==
Pressing a Channel button (while in User mode) focuses the corresponding channel. The currently focused channel is indicated by one of the orange LEDs next to each Channel button. This will also focus the processing chain associated with the selected channel. If the processing chain is mono (i.e. the focused channel is not linked with another channel) then this is the only way to focus that chain. Otherwise, if the processing chain is stereo (which means the focused channel is linked with a neighboring channel) then pressing either Channel button will show the same processing chain. However, any scope displays in the focused chain's GUI will display only the focused channel's signal even in a stereo chain.

Navigation menu