View source for ER-102/Tracker

== Issues ==

* In trigger mode, steps with duration of 1 do not produce changes in CV ([https://forum.orthogonaldevices.com/t/duration-1-in-trigger-mode-doesnt-output-cv-changes/4061?u=odevices thread]).
* Copy/pasting patterns (or more?) between snapshots is not reliable ([https://forum.orthogonaldevices.com/t/copy-pattern-through-snapshot/2330?u=odevices thread])
* CONFIG.INI > user-transition > Transitions configured to be triggered on track-{1,2,3,4} rewinding are not working properly.  The bug is that the actual track used is off by 1 from the configured track.  So for example, user-transition = track-1 will cause track #2 to be used and so on. ([https://forum.orthogonaldevices.com/t/track-specific-user-transition-of-parts-not-working/4636?u=odevices thread])

== Feature Requests ==

{{Tip|The majority of the requests listed here were compiled from requests made by users over at the [https://forum.orthogonaldevices.com/ forum].}}

* CONFIG.INI parameter to set trigger duration (currently 0.5ms) when note repeat is enabled on a step. ([https://forum.orthogonaldevices.com/t/note-repeat-ratcheting-with-triggers/4054?u=odevices thread])
* CONFIG.INI parameter to set reset slop time (current default is 0.5ms) to account for sequencers that output signals later with respect to the clock. ([https://forum.orthogonaldevices.com/t/late-er-101-reset-from-beatstep-pro/2011?u=odevices thread])
* CONFIG.INI parameter to change the behavior of the track config of the note display's root note to also offset the output voltage by the same amount. ([https://forum.orthogonaldevices.com/t/feature-request-option-to-offset-voltage-table-value-with-note-display/4369?u=odevices thread])
* Allow copying of just the GROUP MODIFIER ([https://forum.orthogonaldevices.com/t/copy-group-step-selection-without-copying-transforms-and-slope-matrix/4601?u=odevices thread])