Difference between revisions of "ER-102/Tracker"

From O|D Wiki
Jump to: navigation, search
(Issues)
(Issues)
 
(One intermediate revision by the same user not shown)
Line 3: Line 3:
 
* In trigger mode, steps with duration of 1 do not produce changes in CV ([https://forum.orthogonaldevices.com/t/duration-1-in-trigger-mode-doesnt-output-cv-changes/4061?u=odevices thread]).
 
* In trigger mode, steps with duration of 1 do not produce changes in CV ([https://forum.orthogonaldevices.com/t/duration-1-in-trigger-mode-doesnt-output-cv-changes/4061?u=odevices thread]).
 
* Copy/pasting patterns (or more?) between snapshots is not reliable ([https://forum.orthogonaldevices.com/t/copy-pattern-through-snapshot/2330?u=odevices thread])
 
* Copy/pasting patterns (or more?) between snapshots is not reliable ([https://forum.orthogonaldevices.com/t/copy-pattern-through-snapshot/2330?u=odevices thread])
 +
* CONFIG.INI > user-transition > Transitions configured to be triggered on track-{1,2,3,4} rewinding are not working properly.  The bug is that the actual track used is off by 1 from the configured track.  So for example, user-transition = track-1 will cause track #2 to be used and so on. ([https://forum.orthogonaldevices.com/t/track-specific-user-transition-of-parts-not-working/4636?u=odevices thread])
  
 
== Feature Requests ==
 
== Feature Requests ==
Line 10: Line 11:
 
* CONFIG.INI parameter to set trigger duration (currently 0.5ms) when note repeat is enabled on a step. ([https://forum.orthogonaldevices.com/t/note-repeat-ratcheting-with-triggers/4054?u=odevices thread])
 
* CONFIG.INI parameter to set trigger duration (currently 0.5ms) when note repeat is enabled on a step. ([https://forum.orthogonaldevices.com/t/note-repeat-ratcheting-with-triggers/4054?u=odevices thread])
 
* CONFIG.INI parameter to set reset slop time (current default is 0.5ms) to account for sequencers that output signals later with respect to the clock. ([https://forum.orthogonaldevices.com/t/late-er-101-reset-from-beatstep-pro/2011?u=odevices thread])
 
* CONFIG.INI parameter to set reset slop time (current default is 0.5ms) to account for sequencers that output signals later with respect to the clock. ([https://forum.orthogonaldevices.com/t/late-er-101-reset-from-beatstep-pro/2011?u=odevices thread])
 +
* CONFIG.INI parameter to change the behavior of the track config of the note display's root note to also offset the output voltage by the same amount. ([https://forum.orthogonaldevices.com/t/feature-request-option-to-offset-voltage-table-value-with-note-display/4369?u=odevices thread])
 +
* Allow copying of just the GROUP MODIFIER ([https://forum.orthogonaldevices.com/t/copy-group-step-selection-without-copying-transforms-and-slope-matrix/4601?u=odevices thread])

Latest revision as of 02:22, 21 July 2020

Issues

  • In trigger mode, steps with duration of 1 do not produce changes in CV (thread).
  • Copy/pasting patterns (or more?) between snapshots is not reliable (thread)
  • CONFIG.INI > user-transition > Transitions configured to be triggered on track-{1,2,3,4} rewinding are not working properly. The bug is that the actual track used is off by 1 from the configured track. So for example, user-transition = track-1 will cause track #2 to be used and so on. (thread)

Feature Requests

Tip-bulb.png
The majority of the requests listed here were compiled from requests made by users over at the forum.


  • CONFIG.INI parameter to set trigger duration (currently 0.5ms) when note repeat is enabled on a step. (thread)
  • CONFIG.INI parameter to set reset slop time (current default is 0.5ms) to account for sequencers that output signals later with respect to the clock. (thread)
  • CONFIG.INI parameter to change the behavior of the track config of the note display's root note to also offset the output voltage by the same amount. (thread)
  • Allow copying of just the GROUP MODIFIER (thread)