Difference between revisions of "ER-102/Tracker"

Revision as of 10:17, 1 July 2020

In trigger mode, steps with duration of 1 do not produce changes in CV (thread).
Copy/pasting patterns (or more?) between snapshots is not reliable (thread)

The majority of the requests listed here were compiled from requests made by users over at the forum.

CONFIG.INI parameter to set trigger duration (currently 0.5ms) when note repeat is enabled on a step. (thread)
CONFIG.INI parameter to set reset slop time (current default is 0.5ms) to account for sequencers that output signals later with respect to the clock. (thread)
CONFIG.INI parameter to change the behavior of the track config of the note display's root note to also offset the output voltage by the same amount. (thread)
Allow copying of just the GROUP MODIFIER (thread)

@@ Line 10: / Line 10: @@
 * CONFIG.INI parameter to set trigger duration (currently 0.5ms) when note repeat is enabled on a step. ([https://forum.orthogonaldevices.com/t/note-repeat-ratcheting-with-triggers/4054?u=odevices thread])
 * CONFIG.INI parameter to set reset slop time (current default is 0.5ms) to account for sequencers that output signals later with respect to the clock. ([https://forum.orthogonaldevices.com/t/late-er-101-reset-from-beatstep-pro/2011?u=odevices thread])
+* CONFIG.INI parameter to change the behavior of the track config of the note display's root note to also offset the output voltage by the same amount. ([https://forum.orthogonaldevices.com/t/feature-request-option-to-offset-voltage-table-value-with-note-display/4369?u=odevices thread])
+* Allow copying of just the GROUP MODIFIER ([https://forum.orthogonaldevices.com/t/copy-group-step-selection-without-copying-transforms-and-slope-matrix/4601?u=odevices thread])