Difference between revisions of "ER-301/ADSR"
From O|D Wiki
< ER-301
(→input) |
(→attack) |
||
| Line 13: | Line 13: | ||
{{GainBias|gain (-10 to 10) | {{GainBias|gain (-10 to 10) | ||
bias (0s to 99s)|time in seconds}} | bias (0s to 99s)|time in seconds}} | ||
| + | |||
| + | |||
| + | This parameter sets the (maximum) amount of time it takes for the envelope to ramp up to a value of 1 when it receives a gate signal. | ||
=== decay === | === decay === | ||
Revision as of 05:48, 31 May 2018
Description
A traditional ADSR envelope with modulate-able controls for the 4 stages: attack, decay, sustain and release.
Parameters
input
| Control Type | Has Sub-chain? | Sub-chain Parameters | Behavior |
| Threshold | no | threshold (-1 to 1) | gate |
This parameter gives you access to the threshold level of the input comparator used to detect the rising and falling edges of your incoming gate signal. There is also a button for manually firing gates.
attack
| Control Type | Has Sub-chain? | Sub-chain Parameters | Fader Scale |
| Gain/Bias | yes | gain (-10 to 10)
bias (0s to 99s) |
time in seconds |
This parameter sets the (maximum) amount of time it takes for the envelope to ramp up to a value of 1 when it receives a gate signal.
decay
| Control Type | Has Sub-chain? | Sub-chain Parameters | Fader Scale |
| Gain/Bias | yes | gain (-10 to 10)
bias (0s to 99s) |
time in seconds |
sustain
| Control Type | Has Sub-chain? | Sub-chain Parameters | Fader Scale |
| Gain/Bias | yes | gain (-10 to 10)
bias (0 to 1) |
linear |
release
| Control Type | Has Sub-chain? | Sub-chain Parameters | Fader Scale |
| Gain/Bias | yes | gain (-10 to 10)
bias (0s to 99s) |
time in seconds |
